How to make Zelda’s Tiara

————————————————————————————————————————————

<- Back to Tutorials

————————————————————————————————————————————

Printable pattern: (click for full size)

What you’ll need:

Printer (or pencil) and paper for pattern
Scissors
Yellow and red felt fabric (fabric size around 8 1/2 by 11 inches)
Hot glue gun

Start by printing the pattern.
If you don’t have a printer available, you can use the pattern here as a reference to draw your own pattern with.

Once you have your pattern begin cutting it out.

Measure around your head then cut two long strips of fabric (about half an inch wide) to use as your tiara’s base.

Now it’s time to take your felt and pattern and cut out the various parts of the tiara.

Take your hot glue gun and glue the pieces together.

Take one of the long strips of fabric you cut earlier and glue the center piece on in the middle.

Once you have your center begin arranging and gluing the other pieces into place.

Lastly, take the other long strip of fabric and glue the ends of the tiara to it, creating a circle and finishing the tiara!

How to make Zelda’s Tiara

————————————————————————————————————————————

<- Back to Tutorials

————————————————————————————————————————————

Printable pattern: (click for full size)

What you’ll need:

Printer (or pencil) and paper for pattern
Scissors
Yellow and red felt fabric (fabric size around 8 1/2 by 11 inches)
Hot glue gun

Start by printing the pattern.
If you don’t have a printer available, you can use the pattern here as a reference to draw your own pattern with.

Once you have your pattern begin cutting it out.

Measure around your head then cut two long strips of fabric (about half an inch wide) to use as your tiara’s base.

Now it’s time to take your felt and pattern and cut out the various parts of the tiara.

Take your hot glue gun and glue the pieces together.

Take one of the long strips of fabric you cut earlier and glue the center piece on in the middle.

Once you have your center begin arranging and gluing the other pieces into place.

Lastly, take the other long strip of fabric and glue the ends of the tiara to it, creating a circle and finishing the tiara!

How to make Zelda’s Tiara

————————————————————————————————————————————

<- Back to Tutorials

————————————————————————————————————————————

Printable pattern: (click for full size)

What you’ll need:

Printer (or pencil) and paper for pattern
Scissors
Yellow and red felt fabric (fabric size around 8 1/2 by 11 inches)
Hot glue gun

Start by printing the pattern.
If you don’t have a printer available, you can use the pattern here as a reference to draw your own pattern with.

Once you have your pattern begin cutting it out.

Measure around your head then cut two long strips of fabric (about half an inch wide) to use as your tiara’s base.

Now it’s time to take your felt and pattern and cut out the various parts of the tiara.

Take your hot glue gun and glue the pieces together.

Take one of the long strips of fabric you cut earlier and glue the center piece on in the middle.

Once you have your center begin arranging and gluing the other pieces into place.

Lastly, take the other long strip of fabric and glue the ends of the tiara to it, creating a circle and finishing the tiara!